Breaking Bad : Never Underestimate SLA fumes / DUO HSBI raffle / Reblog Lottery DUO BONUS !

20240817_164907.jpg

So much for a lazy Saturday kept fairly busy today I have a multitude of things I can share in this blog post but I will be sharing the one that is most interesting and also potentially the most helpful.

So a little while back I got an SLA printer, now I have many printers but non like this, it's all upside down literally a build platform dips into a vat of resin and then a LCD screen at the bottom cures the resin strategically to make a print upside down.

The upside to these machines is a much greater detail and a cleaner finish perfect for jewelry and making molds for other precious metals casting related activities.

Now I had this unit for a while I shot first and asked questions later, I purchased it and when it showed up I did research and realized this thing is a hassle and can be fairly toxic so it's just been sitting there idle for a while until today I had the bright idea to give it a shot without first building a ventilation system for the fumes as I originally planned but having the kids out of the house I figured how bad can it really be...

THE SHORT AND SWEET

If you get a SLA printer you need to set up a ventilation system to air out the fumes!

In other news leo shorts seem to be working, that's a neat development and it's great to see progress for hive microblogging, right below is a short about this situation as you can see I start off fairly cocky.

20240817_165141.jpg

Look at this cool guy oh fumes he don't care but a few minutes into it , I was rethinking my decision, it was starting to smell really bad like some next drug synthesis was taking place, I realized the flaws of my ways but I already committed, I was printing a challenge coin for someone and wanted to see if I could squeeze out some more details than from my regular printers, it's about the size of a 1 oz silver round and it said it was going to take 3 hours to print!

I was starting to feel the buzz so I realized I gotta do something I brought in an air purifier and set it next to the printer opened windows and got some fans going, that helped but still was fairly bad.

As you can see I had to take it back to the covid days and bust out a mask to stop the spread.

20240817_170641.jpg

The worst part about it beside the L to my health was during the entire process I had no clue what is happening since it's all happening within a liquid! So it could be fucking up and poisoning me to make trash 🤣

20240817_173432.jpg

Well after 3 hours It managed to finish and looks decent it has some support structures just like the other printers that need to be broken off but this part also needs to be washed and cured further with UV light or sunlight if you ain't got the gadgets.

I hope once I am done with it the part will be worth while.
I lefts it in the machine as there is still resin that can drip off the part back into the vat I also covered it with a garbage bag in the mean time to prevent any sunlight from curing the resin inside, I will probably leave it in there for a while and take it out another time to give it a wash and finish the curing process.

20240817_210618.jpg

20240817_210603.jpg

Moving forward I will not be using this machine until I get the ventilation system sorted, that means I got to buy and print stuff to make it 🤣 but if I am really impressed with the part this process will be expedited, so far I really like my other machines more a lot less hassle even if the part may not be as nice.


August DUO HSBI Raffle

Prizes 3 prizes of 50 DUO each

Tickets Tickets are 1 HSBI each no limits to the amount of tickets you can purchase

Deadline August 30th 2024

Draw August 31st 2024

Bonus tickets You can also get 10 bonus tickets by writing a post about DUO!
More details in the Technical details section below

Technical details

To get a ticket send 1 Hive to @steembasicincome and put @duo-curator in the memo, after this be sure to leave a comments about your purchase in this post

The HSBI not only benefits you with life time upvotes on your posts, but also the curation account's posts. This means more income coming in, of which 90% is paid back to DUO stakers (200 min)and 10% is reinvested to compound the growth of the project.

As mentioned there is no limit to how many tickets you can get!
You can win more than one prize if you have enough tickets and lady luck is on your side !

Bonus tickets are limited to 10 per person

  • Write a long form post 250 word minimum talking about DUO and this raffle and tag 5 of your active friends who might be interested in the project.
  • Share a link to your post as a comment in this post

The draw will be conducted using the wheel of names and the winners will be announced in a DUO post and paid out on August 31st!

The founders will not be participating in this raffle to keep things fair

Original raffle post here



Reblog lottery

We got 38 participants for our reblog lottery this time around.

@blessed-20 @blitzzzz @bntcamelo @caspermoeller89 @chaosmagic23 @daddydog @dgi @duckmotor @ecencypoints @eolianpariah2 @ferod23 @henruc @hjrrodriguez @jenam @jhonnygo @jorgebgt @khantaimur @kungfukid @ladymisa @lolodens @middle-earthling @miriammarga @mirroredspork @mxm0unite @necho41 @oadissin @olaf.gui @pepedook @pepetoken @rebe.torres12 @revolverocelotyt @rosauradels @stekene @vrezyy @waynechuasy @ydm6669 @youloseagain and @yova

and the winner this time around is....

1491d18a43c7438ab04824d37d1c8023.gif

d938caf2ff254da1b7cffcf50f6fa020.gif
Looks like we got a dud ,better luck next time!

@jorgebgt ! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
ss.png

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post

This is all done automatically and I apply the winner to be a beneficiary for the post.

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.


I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

  • Invest only what you can afford to lose and be mindful of the potential risks.
  • Unless you can accept delivery stay away from futures and stick to physical.
  • Leverage is a great tool for losing money fast.
  • Numismatics for the lows stick to smart stacking baby.
  • Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

hive bullion exhange.jpeg
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES




Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO

You can find out more about the #silvergoldstackers community in this post here

1000029296.jpg

HOC Hive Onboarding Committee discord link here


Weekly Post Schedule

DayPost
MondayArt&3D
Tuesday
Wednesday
Thursday
FridayStacker of the week
SaturdayLazy Saturday post
Sunday

Profit share

10% of this post earnings go to @jorgebgt for being our reblog lottery winner.


That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha



0
0
0.000
25 comments
avatar

!hiqvote

0
0
0.000
avatar

!hiqvote !pimp

0
0
0.000
avatar

You received an upvote of 90% from Precious the Silver Mermaid!

Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.

0
0
0.000
avatar

Silly guy got a machine that smell stronger than !DOOK. lol !BBH

0
0
0.000
avatar

Resin printing can smell and be pretty toxic too ^^ I hiiiighly recommend you to check out less smelly resins. I have the nova 3d water washable and it is amazing. Barely smell anything, the curing is also 100% simpler and ai can bump the layer time to around 4seconds to even 1.5 seconds. I have no ventilation system, the printer is located at the end of my workung room. It is doing it's job while I am sitting in the opposite corner working at my day job!

0
0
0.000
avatar

nice I will have to check that stuff out, In this instance I used water wash resin from anycubic I can only image how bad the other stuff would be, But I also don't want to be limited by the resin I can use so will build a ventilation system, I got lots to learn here been in FDM for years but this is a different ballgame
!DOOK !BBH

0
0
0.000
avatar

Excellent story about the printer, I would like to know more about it and what you do, what you print and how the final work turns out.

Participating in your initiative

Excelente el corto de Inleo

0
0
0.000
avatar

Sounds like something you don't want to mess with any further unless you sort out the ventilation. Stay safe over there lol. Did it take long for the smell to be gone fully?

0
0
0.000
avatar

Congratulations @bitcoinman! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You have been a buzzy bee and published a post every day of the week.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000