New Hive Bullion Exhange Logo and Round / Reblog Lottery DUO Bonus

avatar

20241003_214406.jpg

In this post I share a new logo for the Hive Bullion Exhange and show off some behinds the scenes on the making of the round.

Right above is my firs HBE round design, it's super basic and a little bland.
This time around we got a more creative and fancy design.

Right bellow is one of my better samples made with the resin printer this was a little while back and I think I can get much better results but I rather share the struggle and journey so y'all can see it ain't that easy

20241003_214429.jpg

I started out with my regular filament printers. came out pretty nasty

20241003_214634.jpg

That ain't good at all folks lol

20241003_214638.jpg

I got some better results with another machine but still leaves a bit to be desired

20241003_214646.jpg

and then my best print with the filament printers for this one I used a 0.2 nozzle this was the main part why it came out better due to some smaller details, I tried to print more but the nozzle got clogged pretty bad and I gave up on it.

20241003_215000.jpg

Then I tried with the stock resin printer, the standard is to print the whole part on a base with supports that rough texture is all the left over supports , yuk

20241003_214456.jpg

also had some strange issues like this hole between the i and v in hive, I am guessing maybe I did not mix the resin good and there was an air bubble or something

20241003_214515.jpg

I also had some discoloration I am guessing that can also be due to not mixing the resin well, it is suggested to mix it a little after each print

20241003_214530.jpg

I also tried to print right on the plate without supports and as you can see bellow I snapped one trying to pry it off the platform

20241003_214540.jpg

I also broke off some of the pour supports dropping the pieces.

20241003_214600.jpg

I am looking forward to trying pouring again soon, but it has been very hectic these past few days,
I also need to print a part for one of my printers with clear resin it should be very glass like and I will also be experimenting with custom clear capsules in this batch to be printed with the parts I need for my other printer.


Reblog lottery

We got 32 participants for our reblog lottery this time around.

@blitzzzz @calebmarvel01 @caspermoeller89 @cheeamaka @daddydog @daniasi @duckmotor @ecencypoints @eolianpariah2 @evitadiss @fixyetbroken @florakese @henruc @hiro.guita @hjrrodriguez @justclickindiva @kungfukid @ladymisa @logen9f @monsterbuster @oadissin @olaf.gui @pepetoken @ronnie10 @servelle @sudutpandang @sylmarill @trautenberk @vaynard86 @vrezyy @ydm6669 and @youloseagain

and the winner this time around is....

b10de28defd94b40a75031227a6fa45a.gif

e51f333c869a444cac70cfa7ba20a618.gif
Looks like we got a dud, better luck next time!

@hjrrodriguez ! Congratulations enjoy your 0.2 DUO tokens, 250 DOOK, and 5 HBI units more about HBI units here
ss.png

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 0.2 DUO token, 250 DOOK and 5 HBI units (bonus wheel) on my next post

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.


I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

  • Invest only what you can afford to lose and be mindful of the potential risks.
  • Unless you can accept delivery stay away from futures and stick to physical.
  • Leverage is a great tool for losing money fast.
  • Numismatics for the lows stick to smart stacking baby.
  • Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

hive bullion exhange.jpeg
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES




Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO

You can find out more about the #silvergoldstackers community in this post here

1000029296.jpg

HOC Hive Onboarding Committee discord link here


Weekly Post Schedule

DayPost
MondayArt&3D
Tuesday
Wednesday
Thursday
FridayStacker of the week
SaturdayLazy Saturday post
Sunday

That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha



0
0
0.000
51 comments
avatar

I like the design!

0
0
0.000
avatar

Thanks looking forward to pouring and having some silver variants as it was meant to be lol !DOOK !BBH !LOL !ALIVE

0
0
0.000
avatar

You received an upvote of 79% from Precious the Silver Mermaid!

Thank you for contributing more great content to the #SilverGoldStackers tag.
You have created a Precious Gem!

0
0
0.000
avatar

The output is great.😊 Thank you for letting me join the lottery.😊

0
0
0.000
avatar

Busy printers man, neat stuff! !BBH !DOOK !WEIRD

0
0
0.000
avatar

It's back to the drawing board.
!BBH

0
0
0.000
avatar

I stay at the drawing board !LOL !DOOK !PIMP

0
0
0.000
avatar


3D printing is an interesting thing. I work in education. We also have one printer at our workplace. I haven't worked with her yet, but maybe one day I will.

0
0
0.000
avatar

Nice Prusa mini I got it's big brother !DOOK !BBH

0
0
0.000
avatar

Its a lovely design man!!🔥

0
0
0.000
avatar

Cute!

0
0
0.000
avatar

dook me daddy !LOLZ

0
0
0.000
avatar

That is going to look awesome when it's done! I'll want some of that sweet silver for sure!
!DOOK
!BBH

0
0
0.000
avatar

I hope I get a chance to try pouring some soon !DOOK !BBH !PIMP

0
0
0.000
avatar

Patience, @bitcoinman, it will soon come out!
!BBH
!LUV

0
0
0.000
avatar

Not worried about getting it made out of plastic turning it into some nice silver is the real challenge !DOOK !BBH

0
0
0.000