Another Crack at Resin Printing/ Reblog Lottery DUO Bonus

In this post I share my experience trying my hand at resin printing again I mentioned I would not be messing around with it until I get my ventilation system sorted and I am nearly done everything has been printed I am just waiting on a duct pipe to come in to connect it all.

Well if that's the case why did I try it out, well I also bought some cheap filters for 20 bucks a pop, they are specially made for these types of printers so I put a cap on my enclosure to seal it with them inside and fired up the printer

Last time I had success but the supports caused issues when I took them off, So I tried another software to see if the supports will come out better.

I got the printer started and it seemed to be doing it's thing, my enclosure seemed to do the trick I could not smell a thing but I am not sure how effective the filters are or if I just trapped all the fumes inside.

Anyway a few minutes into it I get a notification that there is an unexpected error, I pull of my enclosure and I see some of the prints came off the build plate, I am new with resin printing so not sure what the deal is if the supports or setting are off or if its a bit of both.

Well I cleaned the plate and resin tank and tried again with the original software I had 2 relative successes with and this time around it managed to finish the print.

It came out pretty good some strange things like some discoloration on some parts, and I am not really sure what the scoop with that is being an armature I hid some items those are for another post 🤣

I washed and cured the parts with a uv light and then tried to remove the supports and I ran into similar issues with the challenger rounds the other 3 bits printed flat came out alright with the back being a bit rough do to the supports but it's not really a critical area and can be sanded down the face is the main part , the custom lynx shield came out very nice

The rounds as I said came out nice but when I started to break off the supports it got ruined, I still have a lot to learn and lots of experimentation

This is water wash resin and is supposed to be slightly less toxic I also got some high clarity resin but I will not be messing with that one until I get the duct pipe and can have the fumes blow outside, I saw some people getting some really nice results and I may be able to make some high quality custom capsules with good clarity.

---

Reblog lottery

We got 34 participants for our reblog lottery this time around.

@blitzzzz @bntcamelo @caspermoeller89 @cheeamaka @daddydog @daniasi @duckmotor @ecencypoints @ferod23 @florakese @henruc @henrysw @hiro.guita @hjrrodriguez @jenam @jhonnygo @jorgebgt @kungfukid @ladymisa @logen9f @miriammarga @oadissin @olaf.gui @ronnie10 @rosauradels @servelle @sylmarill @trautenberk @vaynard86 @vrezyy @weone @ydm6669 @youloseagain and @yova

and the winner this time around is....

So close but looks like a dud, better luck next time.

@cheeamaka ! Congratulations enjoy your 0.2 DUO tokens, 250 DOOK, and 5 HBI units more about HBI units here

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 0.2 DUO token, 250 DOOK and 5 HBI units (bonus wheel) on my next post

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.

---

I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

• Invest only what you can afford to lose and be mindful of the potential risks.
• Unless you can accept delivery stay away from futures and stick to physical.
• Leverage is a great tool for losing money fast.
• Numismatics for the lows stick to smart stacking baby.
• Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

---

BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES

---

Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO

You can find out more about the #silvergoldstackers community in this post here

HOC Hive Onboarding Committee discord link here

---

Weekly Post Schedule

Day	Post
Monday	Art&3D
Tuesday
Wednesday
Thursday
Friday	Stacker of the week
Saturday	Lazy Saturday post
Sunday

---

That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha